Switched RLC Circuit - SwitchedRLC

model SwitchedRLC "An RLC circuit with a switch"
  type Voltage=Real(unit="V");
  type Current=Real(unit="A");
  type Resistance=Real(unit="Ohm");
  type Capacitance=Real(unit="F");
  type Inductance=Real(unit="H");
  parameter Voltage Vb=24 "Battery voltage";
  parameter Inductance L = 1;
  parameter Resistance R = 100;
  parameter Capacitance C = 1e-3;
  Voltage Vs;
  Voltage V;
  Current i_L;
  Current i_R;
  Current i_C;
equation
  Vs = if time>0.5 then Vb else 0;
  i_R = V/R;
  i_C = C*der(V);
  i_L=i_R+i_C;
  L*der(i_L) = (Vs-V);
end SwitchedRLC;

We once again encounter this limitation:

MagicDraw/Cameo could not handle export of the following expression:

Vs = if time>0.5 then Vb else 0;

    vs=null0.5nullnullnullnullnull;

It turns out, however, that MagicDraw/Cameo can export the following fine (just not the inline "switching" form):

if time>0.5 then
  vs=vb;
else
  vs=0;
end if;

The exported Modelica code is:

model SwitchedRLC
  SwitchedRLC _SwitchedRLC;
  model SwitchedRLC
    parameter Voltage vb(start=24.0,fixed=true);
    parameter Inductance l(start=1.0,fixed=true);
    parameter Resistance r(start=100.0,fixed=true);
    parameter Capacitance c(start=0.001,fixed=true);
    Voltage vs;
    Voltage v;
    Current i_l;
    Current i_r;
    Current i_c;
  equation
    i_r=v/r;
    i_c=c*der(v);
    l*der(i_l)=(vs-v);
    i_l=i_r+i_c;
    if time>0.5 then
vs=vb;
else
vs=0;
end if;
  end SwitchedRLC;
  type Voltage=Real(unit="V");
  type Inductance=Real(unit="H");
  type Resistance=Real(unit="Ω");
  type Capacitance=Real(unit="F");
  type Current=Real(unit="A");
end SwitchedRLC;